Dry Film Sheet Laminators

Film Sheet Laminators

Dry Film Sheet Laminators

For smaller volume production these Hot Roll Laminators enable the user to apply Dry Film Photo-Resist sheets to a wide range of materials, such as Copper PCB Laminates, Stainless Steel and Brass etc. For ‘one-off’ or very small scale production they offer an economical alternative to the Roll Laminators below. One side is laminated at a time to a thickness of 3mm thick. All temperature and speed controls are microprocessor controlled with a pre-set condition which can be manually overridden. Temperature and speed number (1-6) are indicated on the LCD display. Cold lamination is also possible.

JTLM-11 Specifications:sheet-laminator-1

* The lam 1000/2000 is rugged Laminator for applying Dry Film.
* Photo resist on Copper Clad Laminates.
* Working width : 450mm (18″).
* Maximum panel thickness : 0.3mm to 5.0mm
* Roller Pressure : Variable Spring Loaded.
* Laminating Speed : Adjustable.
* Upper Roller : Spring Loaded.
* Lower Roller : Motor Driven.
* Electrical Power : 230V, 50Hz, 5A operated.
* Dimension : 700mm (H)×575mm(B)×450mm(D)
* Type : Cold Lamination

JTLM-21 Specifications:sheet-laminator-2

* Photo resistor Copper Clad Laminates/Stainless Steel/Aluminum
* Working width : 325mm (12″).
* Maximum panel thickness : 0.3mm to 5.0mm
* Laminating Speed : Adjustable.
* Upper Roller : Spring Loaded.
* Lower Roller : Motor Driven.
* Electrical Power : 230V, 50Hz, 5A operated
* Dimension : 545mm (W)×130mm(H)×270mm(D)
* Type : Hot & Cold Lamination